Have a question? Give us a call: +86-576-88221032

INDUSTRIAL FLUORESCENT LIGHTING

Short Description:

Industrial fluorescent lamp should be installed in a well-ventilated, less dust place, there can not be corrosive gas around, especially the burning of explosive items, such as this lamp is a temperature of a little ten thousand is not a boom. The second is the power supply voltage to the problem, more can fluctuate in the + 20% to-20% of the range, if more than then ready to be bad, the chance of basic damage is very large.


Product Detail

Product Tags

Product Feature

Industrial fluorescent lamp should be installed in a well-ventilated, less dust place, there can not be corrosive gas around, especially the burning of explosive items, such as this lamp is a temperature of a little ten thousand is not a boom. The second is the power supply voltage to the problem, more can fluctuate in the + 20% to-20% of the range, if more than then ready to be bad, the chance of basic damage is very large.

LED fluorescent lamp is a kind of semiconductor solid light-emitting device, which uses a solid semiconductor chip as a light-emitting material. When the forward voltage is added, the carrier in the semiconductor is combined to cause photon emission and produce light. There is a lot of knowledge about LED fluorescent lamp, the following yangzhong Hengyuan lighting introduces the energy-saving and pollution-free performance and light flux of LED fluorescent lamp. Energy-saving and pollution-free performance of LED fluorescent lamp

For a 35W~150W incandescent lamp, the degree of light efficiency lumen produced is 250 lm, and if the LED as the light source, the light energy can reach 25 lm/W, so a 10~12W LED fluorescent lamp can be compared with a 35W~150W incandescent lamp, so is it more energy efficient in terms of power consumption?

The same comparison, perhaps there are businesses said, fluorescent lights are also energy-saving ah, it can also be more electricity saving than incandescent lights. Baby photoelectric to say that in the composition process of fluorescent lamp, the addition of phosphor, need to use the metal mercury to make the light efficiency of a large conversion, and metal mercury is a polluting chemical element, so in the production process, is not advocated.

For the use of LED light source, do not need any chemical increase, so for the environment and the human body, will not produce any pollution factors, especially critical is the use of other product light source conversion rate can only reach about eighty percent, and the LED light source is much higher than other similar products.

图片 1

  • Previous:
  • Next:

  • Write your message here and send it to us